Appraisal - Cosmic Warrior

Home	Introduction	A Tribute To A Western Yoga Master	Irrefutable Proof
Photo Gallery	Article Cycle Canada	Cosmic Warrior Appraisal	Jagg448 Website

Allan Jaggard Phone: (519) 927-5895 E-Mail: info@jagg448.com

Motorcycle Appraisal

Model	"Warrior" Nempco "Bike-In-A-Box"
Style	Soft Tail
Vin #	RBTO8Q98561211448
License/Tag	COSMC
Mileage	0000.0 KMS
Owner	Allan Jaggard
Condition	Immaculate/Show quality
Chassis	Nempco/Paughco - the complete frame has been molded and all unnecessary tabs removed. The frame is completely custom painted to match base colour of entire body works
Body Works	The tanks have been completely molded and enclosed in the front portions. Dash panel remolded and indicator lights installed for neutral and oil warning. Front fender slightly modified and mounted with custom fabricated billet mounts. Rear fender molded to cover all side areas and a custom rear brake light counter sunk (pro-one) The standard front 21 inch wheel has been changed to a 19 inch Styleglide Warrior Wheel to enhance the cycle low profile. Rear struts slightly modified and tapped for rear laser lights (turn signals) which are mounted on custom fabricated billet mounts. Rear fender strut mounts are custom fabricated from billet also. Front lazer light are mounted on a custom fabricated billet piece and are attached to the triple trees which hold the upgraded 46 MM. completely adjustable Paidi forks/
Paint/Body Works	Both fuel tanks pressure tested and sealed. All metal parts primed a minimum of twice and bases coated with PPG Prizatique Light blue/black then all parts clear coated a mimimum of two times then polished in preparation for airbrushing. Airbrushing of the entire solar system was done by Mr. Terry Collins of Burlington Ontario, Canada.) Mr. Ron Gibbs also of Burlington did the special effects on the air breather and the dash panel, which depicted the image of a "Yoga Master," by the name of Sir George King d.D., TH.D. who passed away at 4:48 am on July 12th, 1997. To whom the project bike is dedicated. The quality is simply unbelievable. The entire solar system has been replicated in as close proportions as possible using all of the metal components front fenders, rear fender gas tanks etc. It should also be noted that the special effect and images of Sir George King are replicated from actual photographs. One of which is a ghost image that can only be seen with appropriate light. Value of entire painted components $4500.00 CDN paint only (approx. 30% supplied by SCM.)
Engine Works	96 inch ss. stroker motor with HD nose cone/ss carb. Value of engine: Suggested retail $9200.00 CDN (included in customer supplied.)
Drive Train	Nempco transmission in a box side cover and top cover have been replaced with OEM HD. Original drive pulley replaced with traller OEM HD socket. Value of transmission $2300.00 CDN (included in customer supplied.)
Customer Supplied Parts	Approximately 85% of the necessary components were supplied by Mr. Jaggard see attached invoice marked "A" total = $21,920 CDN. Stylemaster provided all other components and the labour and expertise necessary to complete the project to a show quality product. Stylemaster's billing accounted for $13,624.78 CDN There was a 150 man hours billed at $55.00/hour (Specially reduced rate) fabrication rate $63.00/HR (specially reduced rate @ 8 hours. Taxes 8% PST 7% GST = $1,777.14 Hardware chrome/stainless steel/braiding all allen bots smoth side chrome. All washers chrome. All neilock chrome where possible. All supply and returns stainless steel braid. Seat leather "Danny Grey" by Arlen Ness. In summary one must account for the customer supplied parts which he was able to obtain at a price of 25% below wholesale cost due to the nature of his employment at Tucker Rocky/Nempco.
NOTE:	DO NOT FORGET THE REDUCED LABOUR RATE.
	The resale value of the motorcycle, taking into consideration the highly personalized paint and artistry should be considered at $53,400.00 CDN The actual retail value of this motorcycle at regular rate with all applicable taxes would be $61,503.75 CDN (see notes below.) Suggested retail parts = $37,125.00 + taxes = $42,693.00 CDN. Paint = $4500.00 CDN. SCM parts = $4,000.00 CDN. SCM lab/machine = $10,310.00 CDN. This appraisal has been prepared by Stylemaster Custom Motocycle Inc. Motor vehicle dealer act reg #04470605, issued 1996-10-17 City of Mississauga License #9603588. Public garage new/used issued 1996/10/02 Venders permit 1051-2187 Issued 30/05/96 Appraisal prepared by Mr. David Fidani owner/President and was dated & signed August 28-98 in the City of Mississauga at 4:48pm.